X2t True Wireless connection problem solution

True Wireless are an amazing piece of tech since wireless connections offer more functionalities than just tangling wires. More of a mess with wires, which most users find it irritating. Using wireless Bluetooth headset like the Acid Eye X2t true wireless is way much better in this context. But even sometimes, True Wireless even have a lot of problems, regarding Bluetooth connections, signal detection, Bluetooth range errors and a lot more. Well, if you are facing such kind of problem, you are in the right place, since we have backed you up here.

Why do Bluetooth connections fail?

Bluetooth connections are the bit less techy than wifi connections (that’s pretty basic) as customised wifi connections regarding hotspot only require once to be configured. Then they work without issues. As with Bluetooth, they need to pair perfectly. After confirmed ID match with full visibility, a Bluetooth connection gets on with another for file sharing or related tasks. So why they fail?

Bluetooth connections fail due to the following reasons ;

1. Lack of visibility between connections 2. Even if paired, the two devices won't work perfectly due to unmatched pairing.
3. The main reason for Bluetooth connection failing is the generation of the connection.
4. Although Bluetooth is backwards compatible, smart Bluetooth devices won't connect to lower Bluetooth ones.
5. The difference in Bluetooth generation( connections between Bluetooth 3 and 4, 4 and 4.1, 4 and 5) have to be newly paired else file transfer error is shown.

Now you know the main reason why it occurs. The main problem when it comes to wireless Bluetooth connections is the generation itself. Latest True Wireless like the Acid Eye x2t true wireless have the latest employed 4.0 connection type which sometimes causes a problem with the lower ones. As said before, Bluetooth is backwards compatible, even lower devices will also connect and work fine with higher generation devices. As with smart Bluetooth smartphones and cameras (mostly), connection problems are common. Smart Bluetooth are specifically designed to work continuously with devices remaining constantly connected without using too much power. Since a constant connection uses up much power. Lower Bluetooth devices with Bluetooth 3.0 or lower, doesn’t directly connect with smart Bluetooth devices at all. The latest 4.0, 4.1, 5.0 ones do work, but with a bit of power usage.

True Wireless like the Acid Eye x2t should work fine with such devices (even though smart Bluetooth is only employed on cameras mostly, and they come with support for 4.0 or better devices). So working with the x2t true wireless shouldn't be a problem at all. Another reason is that Bluetooth pairings are done in the wrong way. When you are using a Bluetooth connection, you have to know your device should be paired with the other in order to work correctly. Else, the error is prone. Also, after being paired properly, the devices seem not to work at all. This is another hassle, which always gets in the way of entertainment.

Solutions to Bluetooth connection problems.
Check out the solutions to the common Bluetooth connection problems that occur during using a wireless earphone.

1. Make sure you have turned on the Bluetooth

Turning on the Bluetooth is something which you see yourself first. As much of the connections now-a-says work with wifi, Bluetooth is rarely used. And latest Android devices come with severe battery optimizations techniques which limit Bluetooth for battery saving. So, check first your Bluetooth connection.

2. Visibility should be on.

You cant use Bluetooth at all unless the two devices that you are trying to connect hasn’t yet discovered themselves. This is a common foolish thing which most users make. See if you did the same thing. Bluetooth devices have to be discoverable by themselves, then only the required ID can be exchanged and connected. Then you will be able to share files or stream using the connection.

3. Restart

A simple reboot or restart may make the device work again. That might not be possible in case of earphones, but for the source like smartphones, mobiles, tablets, and systems. Try most of the steps above to retry for a successful connection pairing. Sometimes, it just works.

4. Repair devices

If you think that your devices are paired but still file transfer is showing error over the connection, then you have repaired. Repairing solves most of the Bluetooth problems, as repairing a device again leads to a formation of a new connection and it will work perfectly this time.
Repairing requires you to delete the specific device from the Bluetooth list and then tap “search for devices”. This can be done on any of the two devices whichever seems fruitful.

5. Stop using the Wifi

One culprit of slower Bluetooth connections or direct interference is the use of Wifi during the process. Most smartphone or device chipsets don’t come with two-way connection porting (or supporting) which might let you do that, use both at once. So, to play safe and avoid connection problems again, Put off the Wifi, internet sharing and all other wireless connections that you might be using except the Bluetooth.

6. Stop data sharing

Data sharing using most of the sharing apps is likely to cause a simple and much bigger problem when you are about to use the Bluetooth. As explained above, due to the same reason, sharing files between two devices using wifi can be a bigger culprit to the ongoing Bluetooth pairing. So, you might have to stop the sharing and then try for pairing for the devices to regain or build a successful connection.

7. See if the devices are close enough

Wifi has very wide range connection stability and can be used over all devices from a far point. You cant do the same with Bluetooth. Apart from that, you can use a few devices with Bluetooth at a time only. And when you are facing such a problem, make sure that your devices are close enough to be connected. This might be a simple solution to your Bluetooth problems and it can be fixed easily.

So, now you can fix any Bluetooth connection problem regarding the Acid Eye 2t connections without any further hassle.

Subscribe by Email

Follow Updates Articles from This Blog via Email

No Comments

Search This Blog

Follow by Email